top of page

Novice Karate Group (ages 8 & up)

Public·23 members
John Duran
John Duran

Bor Pro __FULL__


Uses: Tim-bor Professional offers long-lasting protection against termites, insects, and wood decaying organisms on dry, accessible wood. Apply to wood and wood-based products in spaces such as attics, basements, crawl spaces, and dry exterior wood such as decks for immediate and residual pest control. Dust around nesting sites or create a solution to spray, brush, or pressure inject onto affected areas.




Bor Pro


Download File: https://www.google.com/url?q=https%3A%2F%2Furlcod.com%2F2ufSH9&sa=D&sntz=1&usg=AOvVaw2UxSvWNKnWQt51JjUkeZbi



Hand Sprayers: Mix in a clean container and stir thesolution until completely uniform. Always mix in a separatecontainer then add the solution to a spray tank. Mixing Bora-Care concentrate directly in a spray tank can block hosesand nozzles.Hand Volume Pumping Systems: Add all of thedilution water to tank, start recirculator and slowly add Bora-Care concentrate. Mix until uniform.


Use this boron-based, odorless, wood preservative powder for long-lasting protections against termites, insects, and wood decaying organisms on cry, accessible wood. Apply to wood and wood-based products in spaces such as attics, basements, crawl space structures, and dry exterior wood such as decks for immediate and residual pest control. Dust around nesting sites or create a solution to spray, brush, or pressure inject onto affected areas.


Tim-bor Professional should only be applied for eradicating fungus off of wood and for protecting new wood from future infestation. If treating any wood with an existing infestation, you should always use Bora-Care. Bora-Care will penetrate through an entire piece of wood much deeper and ensure proper control, and it will protect the wood you are treating forever.


Tim-bor Professional is an insecticide, fungicide and wood preservative for the protection and treatment of lumber against fungal decay and wood destroying insects. Tim-bor is a water soluble, inorganic borate salt with insecticidal and fungicidal properties. It is an effective treatment for wood to kill and prevent infestations of decay fungi including white rot, brown rot (i.e. Poria) and wet rots. Tim-bor does not treat mold or prevent mold from growing.


Timbor can be used as a Dust, Liquid, or Foam. It is water soluble, economical, odorless and can be used in conjnction with fumigation for residual protection. It is formulated with a concern for the environment.


Borate compounds are derived from mineral deposits that contain the element Boron. These compounds are use in the production of many products including ceramics, glass and medicines and also work extremely well as insecticides and fungicides.


Insects are exposed to the active ingredient by eating treated wood or by ingestion while grooming. Borates are a contact toxicant to fungi. The borates prevent metabolism of food by insects and fungi causing death.


Timbor comes in a powder form that is used as a powder or mixed with water to form a liquid solution. To create a 10% solution mix one pound of Timbor to one gallon of water. This solution must be applied twice to a bare wood surface. To create a 15% solution, mix 1.5 pounds of Timbor to one gallon of water. This solution can be applied only once to the wood surface.


If you have an active infestation of termites, powder-post beetles or wood borers deep inside the wood then Timbor would not make it through the wood to kill these insects, up to 4 inches with one application or 8 with 2 appliations. BoraCare is a liquid borate but has an additive, a glycol solution, which allows the product to penetrate through the entire piece of wood, therefore it should be used any time you have an active infestation because you are guaranteed it will kill anything in the wood no matter how deep it is. Also, BoraCare will last forever in the wood so you will never have to worry about any infestations in the wood that you treat ever again.


Timbor is more typically used on wood that will not be exposed to weathering and the outside. You would need to re-apply the Timbor each time you re-sealed the wood with the Behr product. The same company that makes Timbor makes a product called Bora-Care. It is more expensive, but it is a liquid solution instead of a powder. The Bora-Care will penetrate deeper in the wood, and protect the wood indefinitely so you would not have to re apply the product ever again. Also, Bora-Care dries clear and is easier to paint or stain over whereas the Timbor leaves a white powder on the surface and is more difficult to paint or stain.


Compare to: Nibor D, Bora Care Tim-bor Professional Insecticide and Fungicide Dust is a fast and efficient way to treat a structure for drywood termites, wood boring beetles, carpenter ants and decay fungi. It can be used as a wood preservative, fungicide and insecticide on its own or in conjunction with other treatments as a supplement. Because of its application flexibility as a dust or liquid, it can be applied as a dust, spray, foam or mist onto wood and cellulose building materials or inside wall voids, cracks and crevices. The active ingredient in Tim-bor Professional Insecticide and Fungicide Dust is a natural borate mineral salt with a low mammalian toxicity and has no known resistance. This active ingredient is known as Disodium Octaborate Tetrahydrate (DOT), a natural borate mineral salt and micro-nutrient. It is manufactured for use in the form of a water-soluble borate powder. Once it's applied in a liquid form by foaming, misting or spraying onto wood or other cellulosic materials, the borate active ingredient creates a protective envelope and remains for years of protection. Often Tim-bor Professional Insecticide and Fungicide Dust is dusted into places like wall voids where pests like to hide as an additional protection. When the dust gets on the insects, they clean themselves and consume the DOT during the cleaning process. DOT is a natural form of elemental boron, which is essential for the healthy growth of plants and believed important in human calcium metabolism. Because animals and humans simply take what they need from their diet and rapidly excrete any excess via the kidneys, DOT has a low acute toxicity. As a result, Tim-bor Professional Insecticide and Fungicide Dust is about half as toxic as sodium chloride or table salt (in a laboratory setting), but very effective against insects and fungi that do not have the same excretion mechanisms. Tim-bor Professional Insecticide and Fungicide Dust Features: * Kills and controls drywood termites, beetles, carpenter ants and decay fungi * Wood preservative and insecticide * Highly effective and economical * Mix with water or apply dry as a dust * For indoors or on exterior * No known insect resistance * Lasts indefinitely, does not degrade over time * Use as part of an IPM or Green program Tim-bor Professional Insecticide and Fungicide Dust Uses: Apply directly to unstained, unpainted wood or dry dust or foam into wall voids, attics and other concealed areas Applications may be made to wood structures including decks, fences, steps, sheds, barns and other outbuildings. Such structures must be protected from excess rain. On wood with drier than normal moisture content, apply by brush or spray two applications of a 10% solution to wood surfaces. On wood with normal moisture content, apply by brush or spray one application of a 15% solution to wood surfaces. Application may also be made by drilling and then injecting the solution under pressure into sound wood or into the insect galleries of infested wood. Tim-bor Professional may be applied as a foam to wood surfaces or injected into wall voids or insect galleries. Tim-bor Professional Insecticide and Fungicide Dust Mixing / Application: 10% solution, mix 1 lb of Tim-bor in 1 gallon of water - 2 applications required 15% solution, mix 1.5 lbs of Tim-bor in 1 gallon of water - 1 application required General use - mix 1.5 lb bag in 1 gallon of water. This mix will treat 200 square feet of wood to a depth of 1/4" Foam applications, mix 1.5 lb bag with water and 2 oz of suitable foaming agent such as Pro Foam. Apply as directed into walls, void and cavities To apply as a dry dust, fill duster with dry Tim-bor powder and dust into cracks, crevices, walls, voids, attics, etc. To apply as a wet mist, mix 1.5 lb bag in 1 gallon of water and apply with Hurricane ULV Mister Fogger Tim-bor Professional Insecticide and Fungicide Dust Target Pests: Subterranean and drywood termites, dampwood termites, decay fungi including white rot and brown rot, wood boring beetles such as powder post beetles, deathwatch and furniture beetles, longhorn borers, bark and timber beetles carpenter ants and other wood inhabiting ants. Tim-bor Professional Insecticide and Fungicide Dust Active Ingredients: Disodium Octoborate Tetrahydrate.............................98% Not For Sale In: NY, SC


Compare to: Nibor D, Bora Care Tim-bor Professional Insecticide and Fungicide Dust is a fast and efficient way to treat a structure for drywood termites, wood boring beetles, carpenter ants and decay fungi. It can be used as a wood preservative, fungicide and insecticide on its own or in conjunction with other treatments as a supplement. Because of its application flexibility as a dust or liquid, it can be applied as a dust, spray, foam or mist onto wood and cellulose building materials or inside wall voids, cracks and crevices. The active ingredient in Tim-bor Professional Insecticide and Fungicide Dust is a natural borate mineral salt with a low mammalian toxicity and has no known resistance. This active ingredient is known as Disodium Octaborate Tetrahydrate (DOT), a natural borate mineral salt and micro-nutrient. It is manufactured for use in the form of a water-soluble borate powder. Once it's applied in a liquid form by foaming, misting or spraying onto wood or other cellulosic materials, the borate active ingredient creates a protective envelope and remains for years of protection. Often Tim-bor Professional Insecticide and Fungicide Dust is dusted into places like wall voids where pests like to hide as an additional protection. When the dust gets on the insects, they clean themselves and consume the DOT during the cleaning process. DOT is a natural form of elemental boron, which is essential for the healthy growth of plants and believed important in human calcium metabolism. Because animals and humans simply take what they need from their diet and rapidly excrete any excess via the kidneys, DOT has a low acute toxicity. As a result, Tim-bor Professional Insecticide and Fungicide Dust is about half as toxic as sodium chloride or table salt (in a laboratory setting), but very effective against insects and fungi that do not have the same excretion mechanisms. Tim-bor Professional Insecticide and Fungicide Dust Features: * Kills and controls drywood termites, beetles, carpenter ants and decay fungi * Wood preservative and insecticide * Highly effective and economical * Mix with water or apply dry as a dust * For indoors or on exterior * No known insect resistance * Lasts indefinitely, does not degrade over time * Use as part of an IPM or Green program Tim-bor Professional Insecticide and Fungicide Dust Uses: Apply directly to unstained, unpainted wood or dry dust or foam into wall voids, attics and other concealed areas. Applications may be made to wood structures including decks, fences, steps, sheds, barns and other outbuildings. Such structures must be protected from excess rain. On wood with drier than normal moisture content, apply by brush or spray two applications of a 10% solution to wood surfaces. On wood with normal moisture content, apply by brush or spray one application of a 15% solution to wood surfaces. Application may also be made by drilling and then injecting the solution under pressure into sound wood or into the insect galleries of infested wood. Tim-bor Professional may be applied as a foam to wood surfaces or injected into wall voids or insect galleries. Tim-bor Professional Insecticide and Fungicide Dust Mixing / Application: 10% solution, mix 1 lb of Tim-bor in 1 gallon of water - 2 applications required 15% solution, mix 1.5 lbs of Tim-bor in 1 gallon of water - 1 application required General use - mix 1.5 lb bag in 1 gallon of water. This mix will treat 200 square feet of wood to a depth of 1/4" Foam applications, mix 1.5 lb bag with water and 2 oz of suitable foaming agent such as Pro Foam. Apply as directed into walls, void and cavities. To apply as a dry dust, fill duster with dry Tim-bor powder and dust into cracks, crevices, walls, voids, attics, etc. To apply as a wet mist, mix 1.5 lb bag in 1 gallon of water and apply with Hurricane ULV Mister Fogger Tim-bor Professional Insecticide and Fungicide Dust Target Pests: Subterranean and drywood termites, dampwood termites, decay fungi including white rot and brown rot, wood boring beetles such as powder post beetles, deathwatch and furniture beetles, longhorn borers, bark and timber beetles carpenter ants and other wood inhabiting ants. Tim-bor Professional Insecticide and Fungicide Dust Active Ingredients: Disodium Octoborate Tetrahydrate.............................98% Not For Sale In: NY, SC 041b061a72


About

Welcome to the group! You can connect with other members, ge...
bottom of page